A septic tank system is also called drain field, is composed of several pipes and tanks. It is designed to hold natural biological waste. Your septic tank plays a part in the smooth running of your household. When you encounter a problem with your septic system, use some of the solutions provided here to keep it in working condition. It is very difficult to diagnose a common septic tank problem. Septic system problems will result in messy cleanup and septic odor and smell all over your house. Follow these solutions to get your failed septic tank system working properly.
Cutting away the roots
Tree roots can do a lot of damage to your septic tank. It can block the pipes which will stop it from working. This can be checked by uncovering the tank, pumping and checking the inlet port. Cutting away these tree roots can be a temporary solution but it can grow again. To treat the issue in an environmentally friendly way, you need to call a professional.
Septic tank filters
The septic tank filters help protect the drain field from getting overloaded with too many solids. While cleaning your septic tanks, most of the contractors clean your septic filters only. Most of the homeowners can clean their septic filter on their own. Do not use harsh chemical cleaners while cleaning the septic filters, it may kill the valuable bacteria.
Regular pumping procedures
Solid buildups can reduce the septic tank capacity. If the septic tank is not emptied, the pipe from the house can be blocked. You need to pump your septic tank until it is emptied. For this, you may call a contractor. Have your system pumped out on regular basis to ensure the system has enough capacity to work efficiently.
Use of detergents
If you use too much detergent while doing laundry, it will be a problem for the tank and pipes. Don’t use harsh and toxic chemicals as they will kill the bacteria which is necessary for the breakdown in a septic tank. Use liquid or gel soap, as it doesn’t contain much phosphate as compared to powdered detergents. Phosphates act as fertilizer that helps the algae to grow in pipes.
Keep all non-biodegradable items away from the system. Keep kitchen waste out of the system, this means no grease or oil down in the drain. It is important to only waste bodily wastage and toilet paper. This will require low maintenance.
The amount of water
Minimize the amount of water going in your septic tank. You can do the laundry on different days and shorten the length of showers. Dual flush toilets will also minimize the water amount. Excess water in the tank will not let the solids to breakdown.
An aerobic system
An aerobic system adds oxygen to your septic system which will slow down the growth o
f biomat. Aerobic bacteria are more efficient in breaking down of organic waste. The failure of the aerobic system can be prevented.
Broken drain lines
When you notice that plumbing appliances are not draining properly but the water level in the tank is same. It must be due to the broken pipe or drain lines. You need to replace that pipe urgently and for this, you may call a contractor to identify and replace it.
Some precautions you should follow with septic tank installation
- A well-designed septic system only dealing with human biological waste, may not develop many problems associated with them.
- You should research about the types of septic tank systems. There is two types of septic tanks: conventional and aerobic system. Both types have their own pros and cons. So, you should have complete knowledge before installing a septic tank system.
- Mark your calendar for the regular maintenance of your septic tank.
- You should get referrals for the product quality, performance, and durability.
- Make sure that the cleanouts must be installed. This will reduce the cost of maintenance.
- Take help from the health department of your area in determining whether the field size is adequate for the number of bathrooms you have in your house and your soil texture.
- Never use your septic system to get rid of solvents and paint thinners. They won’t be eliminated.